Real farmers rate what they bought, from FARM SHOW MagazineSubscribe  ·  Free issue  ·  Send us your Best or Worst Buy
Subscribe to FARM SHOW
Home › Tecumseh › engine

Tecumseh engine

What FARM SHOW readers say · 2 Best Buys1 Worst Buy · Personal & Household Goods

Tecumseh engine

2 Best Buys1 Worst Buy
Best Buy
Steve Cunningham, Sunapee, N.H. · Vol. 38, No. 5 (2014), p. 13

“My 1984 Stihl weed trimmer still runs like a top. I didn’t realize how old it was until I recently had to buy a new-style ‘bump’ string reel on it. I also tuned up the carburetor and put in a new air filter and spark plug.”

On the “worst buy” side, “I’ve never had a Tecumseh engine that would start without requiring a hundred pulls and a lot of babying. One engine was so bad that one hot, muggy day, after making about 50 pulls on the starter, I went in and came out with the perfect tool – a sledge hammer. It’s amazing what one of those can do to an engine block. Now I buy only Briggs & Stratton or Honda engines.”

Worst Buy
Robert Jones, Advance, Mo. · Vol. 32, No. 5 (2008), p. 13

“My worst buy is the 2007 Tecumseh engine in my riding mower. It was very noisy and sounded like it had a bad bearing. The first dealer I called didn’t want anything to do with it. The second dealer said they no longer serviced these engines. The third dealer said I’d have to pay for any repairs and submit the bill for warranty. I contacted the company that I bought it from and they said I could return it at my expense. I wrote to Tecumseh, but they never replied. Then I wrote to the Attorney General’s office and they referred it to the Bureau of Consumer Protection in Wisconsin. They notified Tecumseh, which notified me as well as the other people involved and said they would take care of the problem. So far they haven’t.”

Best Buy
Mel Sporrer, Portsmouth, Iowa · Vol. 32, No. 4 (2008), p. 15

“A few months ago there was a report in FARM SHOW about someone from Wisconsin who had a problem with a 5 hp Tecumseh engine. I had the same problem but found a solution. At the bottom of the carburetor is a bolt that holds the float bowl on. It also is the needle valve that controls the amount of gas going to the engine. I removed the bolt but was careful not to remove the bowl. Using a set of small drill bits I increased the size four times, testing it after each increase. Now it works great.”

Own a Tecumseh? Tell FARM SHOW how it’s held up.

Your report could appear in a future issue.

Send your Best or Worst Buy

More Tecumseh products

Tecumseh 8 hp horizontal shaft 0 best · 2 worstTecumseh 5 hp gas engine 2 best · 0 worst

See all Tecumseh reports →