Gleaner: what farmers say
19 reports in FARM SHOW · 17 Best Buys2 Worst Buys
Gleaner R62 combines
2 Best Buys1 Worst Buy“We traded in our six 1995 Deere 9600 combines for six 1997 Gleaner R62 combines. We were fairly satisfied with the 9600’s except that grain loss on the walkers was excessive in some crop conditions unless we moved slowly. As competitive as the custom harvest business is, it limits our ability to turn a reasonable profit. I think companies need to restrain price increases on today’s combines and offer combines with more capacity without enlarging the overall profile of the machine. We traded for Glean-ers because Deere is getting too independent - they sometimes forget that the customer put them where they are today. We try to replace our combines every year if we can. We found that we were able to trade for Gleaners for less money than we could for new Deere models.”
Idris owns a 1997 Gleaner R62 combine. “It does a good job of cleaning and separating and works well in tough threshing conditions - better than conventional combines I’ve operated. I use it to harvest winter and spring wheat, soybeans, corn, milo, sunflowers, canola, and sometimes barley and rye. It has a lot of capacity and the company provides good support. The 1996 models were underpowered but hopefully that problem has been resolved on the 1997 models. I had problems with the hydrostatic transmission but they’ve been resolved. “I wish Gleaner would quit relying on other sources for many of their parts and manufacture their own. The combine handles a 30-ft. straight header and 8-row corn header perfectly. However, I’m not satisfied with the AGCO 600 series draper header. It isn’t built heavy enough and wasn’t tested extensively enough before it went on the market.”
“Our 1995 GM extended cab 4-WD pickup starts poor, is hard on fuel, and shifts hard. One time it stopped on the road for no apparent reason. The 4-WD never has worked, even after it was repaired. “Our Gleaner R62 combine is underpowered and has weak concaves and a poor stone trap.”
Gleaner R42 4-WD combine
2 Best Buys0 Worst BuysDan’s not happy with his White 271 Rockflex disk. “We broke more axles in two years using this disk than we did in 10 years with our old rigid disk.”
On the “best buy” side, “Our Deere 7800 MFD tractor is almost perfect. It’s easy to operate and has a comfortable cab with an excellent view. It also has a lot of power.
“We like our Gleaner R42 4-WD combine. We had a wet fall last year and the 4-WD paid for itself.
“Our Kinze 2500 twinline 8-row planter is a best buy. It places the seed very accurately which results in good stands. It’s a real pleasure to watch it pivot hydraulically and then drive down the road.”
Dan’s not happy with his White 271 Rockflex disk. “We broke more axles in two years using this disk than we did in 10 years with our old rigid disk.” On the “best buy” side, “Our Deere 7800 MFD tractor is almost perfect. It’s easy to operate and has a comfortable cab with an excellent view. It also has a lot of power. “We like our Gleaner R42 4-WD combine. We had a wet fall last year and the 4-WD paid for itself. “OurKinze 2500 twinline 8-row planter is a best buy. It places the seed very accurately which results in good stands. It’s a real pleasure to watch it pivot hydraulically and then drive down the road.”
Gleaner R52 combine
1 Best Buy1 Worst Buy“I’m well pleased with my 1996 Gleaner R52 combine. Its design allows me to shell corn on side hills without the grain shifting to one side, and without having to pay for the added cost of a regular side hill combine.”
Gary purchased his “best buy” 60 by 120-ft. machine shed from Morton in 1994. “I was really impressed with the quality of materials and the professionalism of the crew that built it.” On the negative side, “My 1992 Gleaner R52 combine was the worst piece of equipment I ever owned. Everything that could go wrong with it did go wrong. We traded it in for a Deere 9400 which we really like.”
Gleaner R-72 combine
2 Best Buys0 Worst BuysTom’s impressed with his 1998 Gleaner R-72 combine. “Last year I ran an 8-row, 30-in. corn head and a 500 series bean head, and it was the easiest, most trouble-free harvest I’ve ever experienced. It always produced a good threshing sample. The biggest challenge is being able to use the machine to its full capacity. The cab has great comfort and visibility.”
On the “worst buy” side, he lists his 1997 White hopper bottom grain trailer. “The axles aren’t aligned correctly so the trailer pulls off center. The door openers require a lot of effort, and the wiring on it wasn’t standard. Also, the brakes are very sensitive to adjustment. I guess you get what you pay for.”
Gene’s the satisfied owner of a 1995 GleanerR72 combine equipped with an 8-row corn head or 25-ft. reel. “One of the things I like best about it is the L10 611 cu. in., 300 hp Cummins diesel engine. It’s very fuel efficient, has a lot of power, and is easy to maintain. It has tremendous capacity and has needed only minor repairs.
On the “worst buy” side are the Yetter heavy duty downpressure springs that he bought for his Deere 16-row front-fold planter. “I bought 64 springs - four for each row - but after only two seasons of use 17 of them were broken. I complained to my dealer and he replaced them but some of them broke. Finally he called the company and they gave me an entire set of new, improved springs. However, I had to personally replace all of them which took a lot of time.”
Gleaner 65 C-2 combine
1 Best Buy0 Worst Buys“I use my Crustbuster 15-ft. 10-in. hoe drill to plant soybeans and milo in six 30-in. rows and also to plant wheat, oats, and alfalfa. No problems. My neighbors often borrow it. “I’ve used my 1987 Gleaner 65 C-2 combine to cut about 400 acres a year for the past nine years. Very few problems. “I like my 1978 Ford F-150 4-WD pickup which I bought used nine years ago. It has 197,000 miles on it but the 400 cu. in. engine is only now starting to use a little oil - a quart every 500 or 600 miles.”
Gleaner F combine
1 Best Buy0 Worst Buys“My 1972 Gleaner F combine is easy to switch from one crop to another, and easy to work on if a part has to be replaced. This combine’s cleaning system is the best, and it’s easy to turn around at the end of the field. I wish there were more machines as good as this one.”
Gleaner L2 combine
1 Best Buy0 Worst Buys“In 2010 I bought a 1979 Gleaner L2 combine at a farm sale with low hours for $2,000. It was in great shape, and I’ve used it to harvest 800 acres of corn a year. The only needed repair was to a slip clutch. It’s a Hydro model and it’s completely like new. It’s also simple to service. It’s an old machine, but it’s a lot younger than me. I’m 86.”
Gleaner M3 combine
1 Best Buy0 Worst Buys“My best buy 1979 International 986 tractor has more than 5,000 hours on it with no problems at all. “My 1986 Gleaner M3 combine does a good job in corn and beans. It’s been trouble-free. “My International 800 planter is a best buy. I use it to no-till corn and soybeans. It does a good job.” On the minus side, he lists his Deere 8300 grain drill. “It was high priced and equipped with Tru-Vee openers that never worked right. It didn’t cover the seed properly no matter how many times I worked the ground.”
Gleaner N5 combine equipped
1 Best Buy0 Worst Buys“My 1983 Gleaner N5 combine equipped with a 24-ft. grain head is my best buy. I ran it flat out in second gear in 83 bu. per acre white wheat and got only 1/10 of one percent dock-age at the elevator. One time I spent an entire day trying to find a shorted-out electrical wire. “My worst buy is my Haybuster 28-ft. sweep plow equipped with 36-in. sweeps. I bought it used in almost-new condition. I spent two days trying to adjust it, but I still couldn’t get it to penetrate untilled winter wheat stubble ground. My neighbor has a 36-ft. model that has no trouble penetrating the ground, even when the sweeps are set at their maximum penetration angle.”
Gleaner R-42 combine
1 Best Buy0 Worst Buys“Our Deere 7800 MFWD is almost a perfect tractor. It’s easy to handle, rides well, and has power. The cab is roomy and comfortable.
“Our Gleaner R-42 combine is a pleasure to operate. It’s equipped with a Cummins engine that has been trouble-free xcept for an oil leak that was hard to find but easy to fix. The engine does like to use fuel, though.
On the “worst buy” side, he lists his Drill Doctor which is designed to sharpen drill bits. “It doesn’t work for us. We called the company and they were helpful, but even after the bits are sharpened they just won’t cut.”
Gleaner R5 combine equipped
1 Best Buy0 Worst BuysDon’s impressed with his 1998 Gleaner R5 combine equipped with a liquid-cooled engine. “It has excellent capacity for a mid-sized combine and does a good job threshing and separating corn, beans, and grain sorghum. The only problem we had was when a pin fell out of a connecting link in the clean grain elevator chain. The engine has a lot of power and runs cool.
“We use a Crary air reel on the combine when harvesting soybeans and it works great. It blows air onto the sickle bar and sends shattered beans into the machine, keeping any short beans from bunching up over the sicklebar. As a result, the crop feeds in evenly.”
Gleaner S68 combine
1 Best Buy0 Worst Buys“Our 2015 Gleaner S68 combine is an excellent machine. Very dependable with great fuel economy. It delivers excellent grain quality and there’s no lost grain on hillsides. Corn or bean quality is outstanding. Dealer support could not be better.”
Gleaner combines
1 Best Buy0 Worst Buys“My 2008 Massey 1745 round baler works great and makes a nice bale. No problems.
“I’ve owned nine different Gleaner combines since 1964, starting with a 1964 E model and going up to a 1990 R40, and I like all of them. They perform just as well as brand new models but cost much less, and they get more grain out of the field.
“It seems that all of today’s grease guns are made in China or India and are just plain junk. I’d gladly pay much more for a U.S.-built gun but I can’t find one.”
Gleaner too
1 Best Buy0 Worst BuysHe’s sold on the new Fieldstar yield sensor from Agco. It replaced a sensor that was only a year old.
“Calibration was simple and easy. I compared the sensor data with a weigh wagon after one pass, made an adjustment, and on the next pass the two were within 0.8 of a pound. When I had an Ag Leader system from Case-IH, we considered ourselves lucky if we were within 3 to 5 percent. My co-op agronomist rode along and was amazed. He calibrates all kinds of yield monitors and told me this is the most accurate monitor he’s ever seen.”
Dietz likes his R65 Gleaner, too. Usually he trades combines every two years because of the Gleaner warranty and the great service his dealer (Isaacson Implement, Nerstrand, Minn.) gives him. “Steve from Isaacson’s comes out and fixes things that I don’t even know need fixing because they are under warranty.”
Read every report in full
FARM SHOW has run reader Best & Worst Buys since the beginning.