John Deere 4620
What FARM SHOW readers say · 3 Best Buys0 Worst Buys · Tractors
John Deere 4620
3 Best Buys0 Worst Buys“My 1994 Deere 4620 is an excellent tractor. It has had a few electrical problems but they weren’t too hard to fix.”
On the “worst buy” side, he lists his 1992 Chevrolet Silverado 4-WD pickup equipped with a 6.2-liter diesel engine. He bought it used in 1996. “It’s a poorly built pickup. The 4-WD should be made to shift like 1971-1976 models. Also, it had many electrical problems. For example, the lights would go out while I was driving at night. New switches for it weren’t cheap. I finally sold it 3 years ago at a loss and bought an older 1976 GM 4-WD pickup. At least it’s not loaded with computers and cheap electrical components.”
“It gets a lot of hard use, but we’ve had very little trouble with it,” says David about his 1998 Kawasaki Prairie 400 4-WD ATV. “The company took care of a few minor problems. I have an artificial leg so I appreciate the automatic transmission. The floor board design is also helpful. There are more powerful ATV’s on the market, but after riding them for a while I really came to appreciate this machine.”
“My 1979 Ford F-250 4-WD pickup is a best buy. It has been all over the country and has been in a few tangles that required some hospitalization, but it came away better for it all.
“My 1972 Deere 4620 and 3020 tractors are dependable and are best buys.
“I’m well pleased with my Deere 535 round baler. I’ve owned Hesston and Gehl models before but this is the best.
“My biggest disappointments have been with my Case-IH 470 and 480 21-ft. disks. In my opinion, these discs were nothing but glorified sheet metal. I sold both of them and bought a Deere 14-ft. model. I can cover the same amount of ground as I had been covering with the two Case-IH models, and do a better job. No problems.
“My Hesston 6650 swather is a disaster. I don’t understand how a company can even put its name on a machine like this. I wish I still owned my Deere 1600 14-ft. hydraswing swather.
“I was given a kit to raise the rear bench seat in my 1985 Ford Supercab pickup. It was purchased through J.C. Whitney and was something that I had asked for. However, it’s a worst buy. The bolt holes in the brackets were about three sizes too big, the washers were too small, and I had to reshape some of them to fit. I was really disappointed with it.”
R.D. Fricker, De Valls Bluff, Ark.: “My best buy is a Long 1200 3-pt. backhoe that I bought used from a farmer who had used it on his Deere 4020 tractor. The tractor’s -high oil pressure and high volume of oil caused it to leak quite a bit of oil. I had the main valve rebuilt for $50 and replaced some hoses. I bought it to use on my Deere 2355 tractor, but might also use it on my Deere 4620. installed a ‘T’ in the hydraulic line between the pressure control valve on the tractor and the hydraulic cylinder valve and ran a hose from the T to a Prince RD150-16 adjustable 0-16 gpm flow control valve that I bought from Northern Hydraulics (ph 800 533-5545). I had to use the flow control valve because the backhoe uses only uses 8 gpm. The return line goes to a porton the hydraulic oil filter cannister. “Tuse the backhoe to dig ditches, remove stumps, and transplant small trees and bushes. I also use it to repair levees and to ( )\9.~2— #£=£pape cunw.ac Best & W ( drain rice fields.”
Own a John Deere? Tell FARM SHOW how it’s held up.
Your report could appear in a future issue.