Stihl MS310 hard
What FARM SHOW readers say · 2 Best Buys1 Worst Buy · Everything Else
Stihl MS310 hard
2 Best Buys1 Worst Buy“I’ve used my Stihl MS310 hard since I bought it in 2000, cutting 10 to 12 cords of wood per year. I’ve only done minor maintenance. It starts with a few pulls and digs right in.”
“My 2009 Stihl MS 310 has been through hell. One time I accidentally ran over it with an 8,000-lb. skid loader. I broke the handle and cracked a cover, but the saw kept on running. I’ve accidentally dropped this saw from trees, pulled it behind my skidder after branches caught it, and done all kinds of other things to it but it just keeps on running. It’s the main saw I use for commercial logging and it has hundreds of hours on it. I’ve replaced at least 3 bars on it and don’t know how many chains.”
On the “worst buy” side, “I bought a pressurized 40-lb. sandblaster from Harbor Freight for my steel fabrication business. I put it together and tried to blast a log splitter for a customer. It worked for about 10 seconds but then would stop until someone shook it, and then it would start again. I had used media suggested by the company, so I thought there was something wrong with the blaster and returned it for a new one. However, the same problem happened again.”
“I’ve purchased two Stihl MS310 chainsaws in the past six years. They’re good saws and always start and have never fouled a plug. However, every two years I have to replace the rubber fuel line from the fuel tank to the carburetor, probably because of fuel degradation due to the alcohol that’s added to the fuel in our area. The company’s engineers need to address this problem. I’ve also encountered this problem with the accelerator pump diaphragms used on Holley carburetors. They last a year or two and then start leaking, which drains the fuel bowl and could cause an engine fire. There’s an alcohol-tolerant diaphragm sold for racing cars, but we also need one for stock street carburetors.”
Own a Stihl? Tell FARM SHOW how it’s held up.
Your report could appear in a future issue.