JCB: what farmers say
13 reports in FARM SHOW · 12 Best Buys2 Worst Buys
JCB 270T track loader
2 Best Buys1 Worst Buy“My best and worst are the same machine. The best part of my JCB 270T track loader is the ability to get in from the side.
“On the worst side, the boom latch didn’t hold, and the rock bucket came through the windshield. They said I had to prove the latch didn’t hold, even though they’d said it was a problem.
“The A/C unit had continuous cooling problems; it’s now on its fifth temperature sensor. After the warranty expired, the dealer said they could fix it. It had too much freon from the factory.
“The battery would be dead after 8 hrs. of sitting. The ECU wasn’t shutting down. I’ve had to use J-B Weld to put plastic back together in the cab. The primary fuel filter is nearly impossible to replace.”
“My 2020 JCB 270T telehandler is a best buy. With the one-arm boom, you can raise something up to work on and get out of the cab. Dealer support has been good. One thing I would have them change is the cab height – it could be 2 to 3-in. lower.
“Deere’s tech policy is a real problem as is their one dealer per region. There’s no competition. How much market share do they have to lose before they change? I put an ACU on my tractor and they had to program it. It was bad and they put four on before they got one that worked. I got charged for programming them because I had put the first one on myself. They also put numerous other parts on that weren’t needed because they could. Guess who paid for them? My next tractor won’t be a Deere.”
JCB skid loader
2 Best Buys0 Worst Buys“My best product purchase has to be my JCB skid loader. As we get older, we make some changes. Climbing over the buckets of other brands of skid loaders to get in them becomes more difficult. I love my JCB for its easy side entrance. I added an extra step under the original step, a hitch on the rear bumper, and a toolbox above the engine access door. My JCB is the best thing since cake and ice cream got married.”
John’s satisfied with his 2013 JCB track loader. “The side entry cab on this machine is really handy, because I can use the loader bucket to hold equipment up off the ground and then exit the machine and work on the equipment at waist level.”
Mark Nolan Van Patten, Tebbetts, Mo.: “Our Whizbang chicken plucker does a fantastic job of plucking up to 3 chickens at a time (www.whizbangbooks.blogspot.com). We built it after buying the plans from Planet Whizbang, a small, homestead-based publishing company that’s owned and operated by Herrick and Marlene Kimball of Moravia, N.Y. It’s a tub plucker. You just flip a switch, drop the birds in the tub, and watch while the machine takes all the feathers off. It all happens in a matter of 15 to 20 seconds.”
JCB 1110 skid loader
1 Best Buy0 Worst Buys“I love my 2002 JCB 1110 skid loader. It’s equipped with a side access door which makes it easy to get in and out of the cab, and is handy if you need to get out with the bucket raised a little. It’s powered by an 82 hp turbocharged Perkins engine, which works great. I never run out of power, just traction sometimes. No mechanical problems. Great machine.”
JCB 160 skid loader
1 Best Buy0 Worst Buys“My Pneu-Dart gun works great to treat livestock remotely with drugs or medications (www.pneudart.com; ph 866 299-3278).
“The 1989 JCB 160 skid loader I bought used in 2003 stands up to hard use and always starts right up. I’ve replaced just the water pump and gone through 4 sets of tires.
“I can’t find parts for my 2014 Howse 10-ft. rotary mower or my 2013 Tonutti disc mower.”
JCB 195 skid loader
0 Best Buys1 Worst Buy“I bought a used 2004 Bobcat A300 skid loader mostly because it has all-wheel steer. In our dry, windy climate a conventional skid loader scuffs up a lot of dirt while turning, but with all-wheel-steer that doesn’t happen. Also, all-wheel-steer produces a much smoother ride. It’s powered by a Kubota diesel engine that works great.”
On the negative side, “I bought my 2014 JCB 195 skid loader used from a dealer in Pennsylvania, who said the machine was in good condition. But if the temperature got anywhere near freezing, the engine wouldn’t start, and the glow plugs are set not to come on until the temperature gets down to 10 degrees above zero. The air conditioning unit didn’t work, either, and I was told it would cost more to repair than it was worth. Another problem is there are very few dealers in our area.”
JCB 210SL front-end loader
1 Best Buy0 Worst Buys“It rides and drives great, has a lot of power, and gets 19 to 20 mpg,” reports Mark, pleased with his 1992 Ford F-350 extended cab pickup equipped with a 7.3-liter diesel engine and 5-speed transmission. “We had problems with the brakes at 128,000 miles. Otherwise it has required only routine maintenance. It now has 137,000 miles on it. “OurJCB 210SL front-end loader is the handiest piece of equipment on our farm. It gets around fine in the mud and turns short. It also has a lot of lifting power. “Our worst buy is my 1994 Chevrolet 1/2-ton extended cab pickup. We thought it would be a good vehicle for running to town for parts, but it gets only 10 mpg which means we spend a lot on fuel. It doesn’t have a lot of power and the 4-WD seems to work only when we don’t need it. I’ll never buy another Chevrolet. I don’t know why the company calls it a truck when it’s not even a real pickup.”
JCB 225 skid loader
1 Best Buy0 Worst Buys“My 2011 JCB 225 skid loader has adequate power and good weight distribution, and I like being able to hook up and release attachments with just the push of a button (www.jcbequip.com). But the best part is there’s a boom arm on the right side of the machine only, and a huge door on the left side. No matter where the bucket level is I can get out safely with just one step to the ground, without having to climb over anything.”
JCB 409B
1 Best Buy0 Worst Buys“My JCB 409B is a small payloader but can lift up to 8,000 lbs., and it bends in the middle so it doesn’t tear up the ground on turns. This payloader costs and weighs about the same as a large skid loader, but is easier to get on and off and has a much better ride.
“My Tapco aluminum siding brake works great on the farm for building repairs and for new construction (www.tapcotools.com). It’s easy to use.”
JCB 930 Rough Terrain4-WD forklift
1 Best Buy0 Worst BuysBen L. Beiler, Ronks, Penn.: “Ithandles like a dream,” says Ben about his “best buy” 1991 JCB 930 Rough Terrain4-WD forklift. “The enclosed cab keeps me warm in the winter and dry when it rains. We love the way it handles and would buy another one if we needed it. The only problem was a bro“We love the way it handles and would buy another one if we needed it.” ken fuel gauge sender.”
JCB skid steer
1 Best Buy0 Worst Buys“I have three pieces of Massey Ferguson hay equipment that are best buys. I have a WR9760 self-propelled disc mower conditioner purchased new several years ago, an 1840 small square baler purchased new 4 years ago, and an RB 4160V round baler purchased new 2 years ago. All three are very reliable.
“The WR9760 has been trouble-free, can cut a lot of acres quickly, cuts very clean, and is quiet and comfortable to operate. It’s probably my favorite piece of equipment to operate.
“The 1840 small baler is trouble-free and simply never misses a tie. Because it’s an in-line baler, it’s easy to maneuver. It makes very solid square bales.
“My RB 4160V bales very solid round bales and has terrific capacity, even in corn stalks. The cutter does a nice job of cutting alfalfa hay. I had one minor issue with the hydraulic tension system, but my dealer was quick to respond to the problem and got it fixed so I could keep baling. I would highly recommend Massey Ferguson hay equipment.
“In 2016, I bought a new JCB skid steer. I bought it because of the side door, roomy cab, and terrific vision out of the cab. Just after the 2-year warranty was up, it started showing a caution light, and the engine would decelerate. The dealer checked it with a laptop computer and couldn’t find a problem and cleared the code.
“The JCB continued to decelerate, but if I kept it at full throttle, it was fine. Finally, at 6 years old and with 3,000 hrs. on it, I called the dealer to pick it up and fix it. After it was there a couple of weeks, I got a call, and they said it needed new electronic injectors along with other fuel system components. When I got it back, it worked perfectly, but the bill was over $9,000.
“A few months later, with another 115 hrs. on it, the engine quit. The dealer hauled it in and found a new injector had failed. JCB covered the injector, but not the bill which was over $4,000.
“I take very good care of this skid steer and do regular maintenance on it with regular oil and filter changes. The machine isn’t abused. I told the dealer that this should never have happened, and I shouldn’t have to face a bill like this. They had no time for me and told me that’s just the way it is. Now move forward another 6 mos. and as I write this, my JCB is back in the shop with a failing hydraulic pump. I sent it to a different dealer this time, and they said the hydraulic filter has metal filings in it, and it appears the gear pump is eating itself up and to expect a bill of at least $5,300 or more.”
JCB tractor
1 Best Buy0 Worst BuysLyle says the Gregory Grappler - a heavy duty grapple fork designed for skid steer loaders - is his “best buy” (Gregory Welding, N. Hwy. 275, Sidney, Iowa 51652 ph 712 374-3366; fax 712 374-2822; Website: www.gregory grappler .com). “It’s designed to fit most skid steer loaders, but I had to make an adapter plate to use it on my JCB 520 4-WD boom loader . It’s tremendously overbuilt so it can be used for handling brush and large logs, round bales, removing fence posts and concrete. It can even be used to scarify or rip tough ground or rock roads.
“We do some custom demolition work and have used the grappler to remove concrete from old feedlots and also to demolish buildings. It also works great for tearing trees out of terraces and piling them up. One time I was able to pull concrete footings out of the ground that were 12 in. wide, 30 in. deep, and 10 ft. long with no problems. This grapple fork is built heavy and all major pivot points are greaseable for long life. It works so well I decided to become a dealer. It sells for a little less than $3,000.
“My JCB tractor is also a best buy. It can reach out a lot farther than a Bobcat, and it has a 4,500-lb. lift capacity compared to 2,000 lbs. for a Bobcat. The extendable boom lets me raise the grapple 16 ft. and extend it 9 ft. in front of me. One time I used it to tear down a 1 1/2-story house, crunch up the debris, and drop it into roll-off containers.”
Read every report in full
FARM SHOW has run reader Best & Worst Buys since the beginning.