Campbell Hausfeld: what farmers say
9 reports in FARM SHOW · 5 Best Buys4 Worst Buys
Campbell Hausfeld (general)
0 Best Buys1 Worst BuyDan’s impressed with his Porter Cable 19.2-volt cordless drill and saw. “I’m a general contractor and have used a lot of cordless tools over the years. However, these are the best. Long lasting batteries and durable on the job site.”
On the “worst buy” side, he lists his Campbell Hausfeld “contractor’s model” airless sprayer. “It lasted for only a very short time after I bought it. The company won’t repair it so now I’m forced to throw it away. This machine is hard to clean, overheats, and doesn’t spray consistently. I wasted my money on it.”
Campbell Hausfeld 3500 portable electric generator
1 Best Buy0 Worst Buys“My 2001 Campbell Hausfeld 3500 portable electric generator came with a built-in dolly, which makes it highly portable. I bought this generator at a farm supply store and would buy another one.
“I like my Black & Decker 12-volt, 18-ga. cordless nailer gun.
“The battery-powered, 5 1⁄2-in. circular saw I bought at Harbor Freight is my worst buy. After a single recharge the saw quit working.”
Campbell Hausfeld 7 1/2 hp air compressor
1 Best Buy0 Worst Buys“I like Red Coat gas tank sealer and ER oil additive. They both work great.
“My 1992 Campbell Hausfeld 7 1/2 hp air compressor is a best buy. It works good and will keep up with two air tools at once.
“In 1966 I bought a Lincoln 180-amp welder and it has worked perfect ever since. It does need new cables now.
“My Select Comfort airbed is outstanding. It’s the only way to sleep.”
The Reliance engine kit he installed in his Deere 4020 tractor is his “worst buy.” “After installation the engine smoked and pumped oil out of the muffler. It wouldn’t start in cool weather and was very hard to start in warm weather. All this even though I followed instructions to the letter. When I was installing the sleeves and pistons, I called the company and told them the rings weren’t seating correctly. They had me try all kinds of things to get the rings to seat. After three months they gave up, but they still wouldn’t replace the bad part and wanted me to buy another kit. No way was I going to do that. Instead I decided to use Deere parts and had no more trouble after that.”
Campbell Hausfeld Farmhand 115 mig/flux core welder
1 Best Buy0 Worst Buys“My 2005 Campbell Hausfeld Farmhand 115 mig/flux core welder works equally well with Mig or flux core wire and has never jammed or overheated. It even kept working after a trailer fell on it.
“My Wagner Pro duty power painter resulted in the noisiest and messiest painting experience I’ve ever had. This unit is heavy, drips all over, and loses prime every time I take my finger off the trigger. The overspray is horrible and makes cleanup a real chore. I’m going back to using my brush and pail. At least then I can listen to the radio all day.
“I like my Brother P-Touch PT 1830 thermal desktop label printer (ph 888 890-3266; www.ptouchlabels.com). It’s easy to use and I can make one label or many, with lots of options so I can stick a label on almost anything or anywhere. The cartridges for it cost a lot, though.”
Campbell Hausfeld Husky Pro compressor
0 Best Buys1 Worst BuyGerald nominates his 2005 Campbell Hausfeld Husky Pro compressor as his “worst buy”. “The tires were low so I put air in them. However, when I went to move the unit it rolled away from me and slipped from my hands, smashing the air controls. We had to replace the parts at a cost of about $60. We bought this unit at Home Depot but they didn’t carry the parts we needed. The machine has no extra leg to help stabilize it. It’s very top heavy and shouldn’t be used as a mobile compressor the way it’s designed.”
Campbell Hausfeld M3000 portable compressor
1 Best Buy0 Worst Buys“The Campbell Hausfeld M3000 portable compressor I bought more than 20 years ago is my best buy. My neighbor has borrowed it so often that his son finally bought one for him. I keep the compressor on my unheated porch and sometimes it’s left out in the rain, but it has never failed.”
Campbell-Hausfeld coil-type roofing nailer
1 Best Buy0 Worst BuysDarroll’s impressed with his 1996 MTD 5 hp rototiller. “It starts well, runs quiet, and does a good job of mixing the soil without ridging.
“I like my 1997 Campbell-Hausfeldcoil-type roofing nailer. I do roofing as a sideline and this nailer works perfect. I’ve done a lot of shingling since I bought it but it hasn’t required any repairs at all.
“My Troy Bilt 5 hp rototiller is my worst buy. It piled the dirt too high and left a lot of ridges and hollows. I took it back to the dealer and tried a wider, 8 hp model. However, it didn’t work any better so I took it back, too. I got all my money back except for $50.”
Campbell Hausfeld gas engine-driven pressure
0 Best Buys1 Worst Buy“My Besler pickup-mounted round bale handler is my best buy (Besler Industries, P.O. Box B, Cambridge, Neb. 69022 ph 308 697-4866). It’s well built and virtually indestructible. I can’t believe how much work this machine saves on cold mornings. I like that I don’t have to start a tractor.
“The Campbell Hausfeld gas engine-driven pressure washer I bought a couple years ago was a worst buy. It quit working after I had used it for only a couple hours. It’s powered by a Briggs & Stratton gas engine, which works fine. However, the washer part leaves a lot to be desired. I kept it for only two months. It comes with a one-year warranty which is also a joke. I couldn’t get anything accomplished with this machine and wouldn’t recommend it to anyone.”
Campbell Hausfeld pressure washer
0 Best Buys1 Worst Buy“My 2007 Campbell Hausfeld pressure washer is my worst buy. It’s supposed to deliver 1,800 psi at 1.8 gpm electric. I bought it on the internet. I had a problem starting this machine from the beginning. I called the company for help and they sent me to a support center 25 miles away, where I left the unit. About 30 days later I was told to pick up a new pressure washer, which I did. I drained it and stored it indoors for the winter. But the following spring that machine wouldn’t start. It had only a 90-day warranty so I decided to solve the problem myself. I discovered that a small brass fitting, which was part of the press switch assembly, had failed.
“I was told the company policy was to replace within 90 days of new, and that no further service or parts were available after that. I’ve since designed a new fitting made from 304 stainless steel, that works fine. I had a friend turn it on a lathe. I’m ashamed of a manufacturer that doesn’t support what they sell. This machine was made in China, but I didn’t know that until after I received it in the factory-sealed box.”
Read every report in full
FARM SHOW has run reader Best & Worst Buys since the beginning.