John Deere 530 round baler
What FARM SHOW readers say · 9 Best Buys0 Worst Buys · Tractors
John Deere 530 round baler
9 Best Buys0 Worst Buys“Back in the early 1960’s my dad bought a new Deere 530, which was a great tractor. I traded it for a Deere 4030, which turned out to be a worst buy because of problems with the hydraulics.
“I’m still riding my 1928 Harley Davidson motorcycle, which is now worth about six times more than what I paid for it.”
Ron says his best buy ever is his 1988 Deere 530 round baler that he bought new. It has made nearly 50,000 bales. “I quit keeping track at 43,000. I’ve had very limited repairs on it.” Instead of paying the original new price of $27,000, Ron bought it at the clearance price of $20,000 when Deere’s 535 model was introduced. “It’s been good. The pickup teeth on this particular model were an inch longer and it feeds hay into the baler better.”
Ron also has a maintenance trick he uses and thinks that has helped his baler rack up such a phenomenal performance record. “I put a liter and a half of gear oil into the rollers, so the oil can seep through the seals and keep the bearings greased all the time. There’s only one drawback to it. You have to park it on the level over night, otherwise the oil will seep out and run down the side of the baler. I started doing this when the baler was about 3 years old. I’ve never had to replace any of those bearings that have had oil in them so it has saved a lot of maintenance time. This has just been a tremendous machine.”
Reid Knapp, Iron River, Mich.: “One of my best buys ever is a 1997 Jeep Wrangler with a Snoway snowplow. Living in northern Michigan we have our share of cold temperatures and snow. The Jeep always starts and it’s amazing the snow it can move for its size. Another plus is that we get at least 22 mpg for our local runs in the summer.”
James Jendro, Atlanta, Texas: “My worst buy is Dura-Coat coating for shop and garage floors that’s designed to fill cracks, holes and pitted areas. It’s supposed to eliminate painting and stop rust and corrosion dead in its tracks. I used the product but it didn’t fill cracks and it got stained with tire marks that would not come off. The product was guaranteed for 2 years and they did replace it once but the replacement covering wasn’t any better than the original. When I called a second time the representative on the phone was very rude.”
“The Massey Ferguson 282 tractor I bought in the fall of 1984 has more than 12,000 hours on it and is our best buy. We’ve used it to help make more than 20,000 small square bales. This tractor was used to cut all our hay until 1999 when a piston went out. We overhauled the engine and today the tractor is still going strong.
“Our Deere 530 baler is a best buy. We’ve used it to bale all our hay since 1985 and it’s still going strong.
“Our 1999 Murray 46-in. riding mower is our worst buy. The engine went out only eight months after we bought it. It was supposed to be guaranteed for two years but we bought the mower from Walmart and they won’t do anything. All they say is that they’re sorry.”
“Other than a valve job on the engine it has never failed me,” says Kenneth, impressed with his 1959 Deere 530. “It’s a basic tractor but it still works well. The wiring on it tended to short out, but it was always easy to find the problem.”
Jane and Bill Armstrong, Crystal
“Three years ago I bought a used 1989 Deere 530 round baler. It’s my best buy. It has a lot of capacity and makes a nice bale. I use it to make brome alfalfa bales that average 1,530 lbs.”
Edward’s the owner of a Deere 530 round baler. “We’ve used it for nine years and have made about 14,000 bales with it, yet it still has the original belts. “OurDeere twin hydraulic rake is a pleasure to use. It helps us make solid bales with hard, slick ends.”
John Tibben, Kincardine, Ontario: John’s the satisfied owner of a 1993 Cheyrolet 3/4-ton 4-WD pickup equipped with a 6.5-liter turbocharged diesel engine. “It has lots of power and gets excellent mileage on long trips - about 25 mpg on the highway and 20 to 21 mpg around town, It rides like a car and is nice and quiet. Starts right up even in the coldest weather. “My 1989 Kubota M6950 DT tractor isn’t really a worst buy because it does everything we want it to and starts good in winter. However, parts for it are expensive. For example, a simple work light switch sells for $73. Another problem is that it’s hard to service. You need the fingers of a newborn baby to work in some of the cramped spaces. “My Deere 530 and 535 round balers have both been best buys. I made 15,000 bales with the 530 before I traded itin for the 535 and I made 17,000 bales with it before trading for a new 535 equipped with net wrap. We'll see how well the new one works. Ido some custom baling and a lot of people ask for these balers. They make tight bales that do a good job of shedding water. Net wrap should help even more.” James Greer, Gorrie, Ontario; James's 1992 Case-IH 8520 in-line square baler heads his “best buy” list. “I've used it to make over 40,000 bales with little downtime. It can make up to 400 bales per hour with minimum leaf loss because it has a low pickup height and because hay doesn’t get handled as much before being tied because there's no cross auger. It makes firm, square bales that truckers really like, “Two years ago I bought a Harco 45-ft. bale elevator. It’s well-built and should last a long time. My only complaint is that it’s too heavy to be easily moved around. To solve the problem I had a friend mount a wheel under the front of it.”
Robert L. Stobaugh, Atkins, Ark.: “One of the best buys we’ve ever made is our rice levee builder equipped with a hydraulicpowered seeder built by Hula Mfg. Co. (Hazen, Ark. ph 501 255-3028). Anyone with 250 acres or more of rice can pay for it intwo years, This levee making and seeding machine saves us money in many ways. On some of our heavier ground we had been making as many as seven trips on one levee to ensure good water retention, but with this machine we never made more than four trips anywhere on our farm last year. Not only do we save time and money by making fewer trips, but we also hold more water where itshould be. We've been able to grow soybeans right next to a rice field where soybeans had drowned in the past because of leaking levees. We can fill the 18-bu. seed hopper with the same bulk seed handling equipment that we use to fill our Deere 530 grain drill.”
Norman Farrington, Olin, Iowa: Norman's “best buy” is his 1988 Deere 530 round baler. “This is my second 530 baler. I used the first one for 3 years and made 8,000 bales. This one’s made 7,000 bales. Very few problems with either baler. “My 1988 Vicon 1350 double wheel rake is another best buy. It rakes fast with very litle leaf loss. We had some trouble at first bul service was good and we erded up with an even stronger machine”
Own a John Deere? Tell FARM SHOW how it’s held up.
Your report could appear in a future issue.