John Deere 1360 discbine
What FARM SHOW readers say · 11 Best Buys1 Worst Buy · Tractors
John Deere 1360 discbine
11 Best Buys1 Worst Buy“My Deere 1360 discbine with impeller has mowed hundreds of acres in all types of conditions. It never plugs and far outperforms any machine we have operated in past years.”
“I’ve used my 1987 Deere 1360 discbine to cut more than 200 acres of hay per year. It still runs great and has had only one bearing replacement. It still has the original belt.”
“My best buy is my Deere 2555 MFWD tractor equipped with a Deere 245 front-end loader. It has about 5,000 hours on it. I’ve replaced the water pump and tachometer but otherwise it has been trouble-free. I use it primarily for loader work but I haven’t had to replace the clutch yet.
“My Deere 1360 rotary mower/conditioner, which I bought used, cuts hay in all conditions, wet or dry, tall or short, and at speeds up to 14 mph.”
On the negative side, Henry says his Deere 1219 sicklebar-type mower-conditioner, which he bought new, caused him “nothing but trouble”. “In heavy hay the reel wouldn’t turn. Instead, hay would wrap around the reel belt causing it to slip no matter how much tension was on the belt. In wet conditions, such as second cut clover, the knife would plug up constantly. I couldn’t go more than 4 1/2 mph in the field and usually spent more time going backward – in order to clear the knives - than going forward. I traded it in for a used Deere 1360 rotary mower-conditioner and it’s a best buy. I’ll never go back to a sicklebar mower again.
“My Breeze windmill is a worst buy. I wanted to use it to aerate my pond to improve the water quality for cattle and fish. Unfortunately, vibration caused the tail section to break off which allowed the blades to hit the mounting pole. The machine was still under warranty so I returned it to the manufacturer. However, instead of replacing the blades all they did was cut the damaged sections from the ends of the blades. This reduced the performance as it required higher wind speeds before it would turn. The bearing on the crankshaft is too light and will only last about four to six months before it has to be replaced. Now the machine has developed an air leak and won’t build pressure. I’ve replaced every bearing and seal on the machine and rebuilt the pump, yet I still can’t seem to get it to work properly. This machine has been nothing but a big waste of money and time.”
Richard’s had good luck with his 1989 Deere 1360 mower conditioner. “I use it in all types of grass and alfalfa to mow 120 acres three times a year and haven’t had any downtime. It’ll mow even 6-ft. tall reed canary grass along my ditches. I use an International 784 75 hp tractor to pull it. I’ve had to buy only about $30 worth of knives a year. “My 1994 Stihl 036 chain saw is my worst buy. I like everything about it for a poorly located switch that controls the choke runoff. When you’re notching a tree and have gloves on, it’s easy to accidentally hit the switch with your thumb which shuts off the saw. That’s not too handy when you’re almost ready to fell a tree and your saw shuts off while cutting the notch.”
Jason Boyer, East Berlin, Penn.: “It makes nice tight bales at a rate of up to 25 bales per hour,” says Jason, owner of a“best buy” 1988 Deere 430 round baler. “My 1991 Deere 1360 disc mower-conditioner works great and will mow as fast as 1 want to drive.”
Pt » = aceeane ahaaesaess . OA Oe Best & Wo ( “Hydro-Tech silage preservative ismy worst buy. It’s designed to be sprayed onto silage and eliminate the need to cover bun- ker silos with plastic. It’s supposed to swell up and shed water, but with all the rain and snow we had, the top 12 to 1Sin.ofsilagein our bunker silo and 12 to 15 in, along the walls was ruined, It was nice not having to bother with tires and plastic, but it wasted too much silage.”
Dave Hauck, Utica, Minn.: “Nothing seems to slow it down,” says Richard about his “best buy” 1993 Deere 1360 rotary mower equipped with an impeller conditioner. “It does a good job of leveling gopher mounds, and has only half as many moving parts as other mower conditioners. So far all I've replaced are knives.”
David B. Overbay, Chilhowie, Va.: “Our 1990 Case-IH 885 is a handy tractor. It has dual pto shafts, a large capacity hydraulic pump, mechanical frontwheeldrive, and good power. My only complaint is the toolbox. It easily gets filled with dirt and is totally useless. “Our Versatile 415 culti-mulcher is a great incorporation tool, It doubled ourcom yields on clay upland soil. “Our Deere 1360 mower conditioner is an extremely efficient machine that makes sicklebars obsolete. We can replace the ‘knives’ on the disc blades for about $12. The machine is heavy, though. On hillsides it’ ll cause our International 1966 tractor to slide.”
David Dougherty, Pylesville,Md.: "It's an amazing mower. After 250 acres of mowing all kinds of hay in various conditions it still has the original knives,” says David about his “best buy” 1989 Deere 1360 discbine.
Robert Stock, Fergus Falls, Minn.: David Dougherty, Pylesville,Md.: "It's an amazing mower. After 250 acres of mowing all kinds of hay in various conditions it still has the original knives,” says David about his “best buy” 1989 Deere 1360 discbine.
Jack Strickler, Switz City, Ind.: “My 1989 Deere 1360 mower-conditioner makes hay mowing a pleasure.”
Steve Korver, New Oxford, Penn.: Steve's had good luck with his 1989 Case 1840 skid stecr loader. “I use itevery day on my dairy and turkey farm. It starts easy in cold weather and speeds up chores and manure hauling. “My 1989 Deere 1360 disc mower conditioner is another best buy. It cuts down and tangled hay faster than the New Holland 495 disc mower it replaced,” William McGuire, Maroa, Ill.; “It's the best vehicle I’ve ever owned,” says William about his 1990 Dodge Ram 3/4-ton pickup equipped with a Cummins dicscl engine. “Starts good in all weather, gets good fuel mileage, and seems to have almost unlimited power. “My Deere 9500 combine is another best buy. It works perfectly, is easy to operate, and does the best job of harvesting I’ve ever seen.”
Richard Noel, Highgate Center, VL: “It has plenty of power, comfort, and economy,” reports Richard, pleased with his 1989 Case-IH Magnum 7120 tractor. “It'll pull a 7-shank subsoiler 12 to 14 in. deep at 6 mph using 6 gal. per hour, The dealer and company have fixed all problems. “My Deere 1360 mower conditioner is another best buy. I’ ve used itto mow 300 of alfalfa, timothy, and reed canary grass. No breakdowns.”
Own a John Deere? Tell FARM SHOW how it’s held up.
Your report could appear in a future issue.