John Deere 9400 combine
What FARM SHOW readers say · 14 Best Buys0 Worst Buys · Farm & Livestock Equipment
John Deere 9400 combine
14 Best Buys0 Worst Buys“My 1994 Deere 9400 combine is a wonderful machine. It has 4-WD and a 6-row corn head. Big shots laugh at it, but I don’t care. It really performs.
“I’m unhappy with the Gearwrench ratchets I bought at Sears. They lock up so I have to turn them backward to unlock them.”
“My Deere 9400 combine has performed even better than I expected. It does a super job of threshing and is easy to service and maintain. I can run it 10 hours a day without getting tired.”
Wayne likes his 1991 Deere 9400 hoe drills. “They work good and come with a transport hitch that’s well designed and easy to use. The metering is fairly accurate and seed placement is consistent. However, the single front wheel is too small for wet conditions. Also, the shanks around the pivot area should be built heavier. Otherwise, these drills are a pleasure to use.” His 1995 MK hydraulic drill filler heads his “worst buy” list. “It’s the worst piece of farm equipment I’ve ever owned. Installation is time consuming and difficult. The hydraulic foldup doesn’t have enough power to lift the auger and comes down way too fast. The electric solenoid valve that controls the auger doesn’t completely shut off the flow so the auger dribbles seed constantly. Another problem is that the latches on the cleanout doors are built too light. Also, the auger safety chain is too light and doesn’t stay hooked. I wish I had bought a Westfield or Brandt model instead.” “My 1982 New Holland TR 85 combine is also a worst buy. It’s probably the best overall designed and the most poorly engineered machine I’ve ever owned. It has adequate capacity for its size and threshes clean. It works well in nice, uniform, 40 to 50-bu. per acre wheat. However, it doesn’t take in heavy straw fast enough and it absolutely refuses to feed in lighter crops, particularly barley. The unloading system is too slow and is comparable to an old Deere 95. Also, the steering linkage is built too light, the hydraulics are marginal - particularly the reel speed control - and the sickle drive has problems. However, it’s an easy machine to operate and, under good conditions, saves more grain than some other brands. I’d probably buy another TR model hoping that the company engineers had learned a few things after this machine was built.”
“Our 1994 Deere 9400 combine handles well, has good visibility, a quiet cab, and easy-to-use controls. It’s also easy to adjust for different crop conditions. So far it’s been trouble-free. “My Jonsered chainsaw worked well for a few months, but now when it starts up cold it works only for a few minutes. The dealer can’t solve the problem.”
Tim’s impressed with his new DMI Ecolo-Tiger 730 tillage implement. “It’s equipped with a front row of 22-in. dia. discs mounted on an independent frame that’s equipped with a hydraulic cylinder, allowing the discs to be raised or lowered to vary residue management. The discs are followed by seven deep-tillage shanks mounted in a ‘V’ formation on 30-in. centers. The discs can be equipped with 2, 7, or 10-in. wide winged ‘Tiger-Points’ that run about 1 1/2 in. under the hardpan to break up soil compaction. Various covering attachments and levelers are available to create the desired residue cover and field appearance. An optional ‘X’ disc frame assembly has individually mounted discs on 15-in. centers that are offset to provide a 7 1/2-in. cut. “I’ve searched all my life for a tillage implement that I really like and have finally found it. It works good in all field conditions. I really like being able to raise or lower the discs independently on-the-go to control the cutting and mixing action. The discs are independently supported on spindles so there are no arbor bolts to ball up or scrapers to plug. The disc leveler at the rear of the implement prevents ridging so that when I’m done the ground is almost as level as when I started. If I want I can raise the discs up completely off the ground and just use the tool as a ripper and leveler. I plan to buy another one someday. “I like my Deere 9400 combine but I prefer the larger engine used in the 9500. “My worst buy is my Ford-Versatile 850 4-WD tractor. It’s an axle buster. The company should have a program to replace axle housings.”
Jack McGregor, Clinton, Ontario: Jack's impressed with his 1991 Deere 9400 combine, “Adjustments are easy to make and the controls are easy to operate. It threshes clean without needing a lot of fine tuning. “My Amazone 801 pneumatic spreader is a worst buy. The fan drive belts don’t last and adjustments are hard to make.”
Hugh J. Moser, Jefferson City, Tenn.: “Our 1991 Deere 4055 tractor is troublefree and uses less diesel fuel than any other tractor we’ ve ever owned, It started right up all winter without preheat or ether. “My 1993 Deere 9400 combine is a best buy. Last year I used it to harvest over 800 acres of corn and wheat without one minute of down time.”
Gary Biester, Clay Center, Neb.: “My 1992 Deere 9400 combine is the most maintenance-free machine I’ veever owned. Ican'tsay enough good things aboutit. I use it to harvest 860 acres of corn, soybeans, and milo, All I have to do is add fuel. “My 1992 Gleaner R52 combine is my worst buy. You name it, it broke. Things got worse the longer I owned this machine. All the main drive belts broke three times and each time both the dealer and the company “There's nothing good about this combine. It's a lemon.” said the problem was caused by operator error. The hydraulic lever in the cab broke off twice, once resulting in a near disaster. There’s nothing good about this combine. It’s a lemon.”
Edwin Brown, Jeddo, Mich.: “Our 1991 Deere 9400 combine equipped with rear wheel assist is one of our best buys. The cab is as quiet as a pickup cab and it steers as easy as a pickup, too. We had a couple of problems, but the dealer solved them. “Another best buy is our Simpalift hydraulic power unitdesigned to raise or lower grain augers (Blazon Corp., Box 212, Litonka, Iowa 50480). Lets us raise or lower the auger right from the tractor seat. “Our Woods 5210 riding mower, equipped with a 5-ft. deck, is easier to operate than any other mower on the market.”
Carl Setlak, Standish, Mich.: Car! Setlak, Standish, Mich.: “Ithandles well and does excellent work,” says Carl, generally pleased with his 1992 Deere 9400 combine. “The cor head works great. The floating soybean head works well in small grain, but it’s a nightmare to use in soybeans. My dealer can’t seem to solve the problem. I’m very disappointed with it.” Thomas W. Biddle, Geddes, S. Dak.: Thomas owns a “best buy” 1982 New Holland 851 big round baler. “It’s a good baler and has generally been maintenance-free. The only problem it has is with straw that’s short and dry, When the bale gets about 1/3 full itquits turning. Otherwise, Idon’tknow how this baler could be improved.”
Niel Hannah, Port Hope, Ontario: Nicl mounted a 1992 Vittetoe twin rotor chaff spreader on his Deere 9400 combine and says it's his “best buy”. “It works well in all crops and has made a large contribution to the success of our no-till soybeans, wheat, and oats.”
Carl Carlson, Yoder, Wy.: Carl is impressed with his 1989 Deere 9400 grain drill. “It has excellent ground clearance and 1 like the three rows of shovels and split rims, There are very few moving parts so maintenance is minimal. I also like the capacity of the grain box. “My 1986 Steiger Cougar 1000 tractor equipped with a LTA Cummins engine is another best buy. [thas the best view and the most cab room of any 4-WD tractor I’ve ever seen, The 12-speed powershift transmission really works great. The tractor is easy to service and built to last. It doesn't smoke at all under full load. “My Dovetee corn burning stove is a piece of junk. It wouldn't burn, All it did was smoke and gas the house, The dealer replaced it but the new one did the same thing. I returned it and to this day the company refuses to refund my money. It cost $1,629. “My 1989 Pontiae Grand Prix SE is a lemon, The controls for the lumbar seats went out, and the cruise control hasn't worked since I bought the car. I’ve replaced the stereo three times and I can't get the compass to stay set.”
Reuben Swarey, Guthrie, Ky.: Reuben, whocustom combines with his brother, says their Deere 9400 and 8820 combines are “best buys”. “The cabs are roomy and as comfortable as sitting in your living room. We can change heads to switch from wheat to corn or soybeans in 10 minutes. Almost all adjustments can be made from the cab. No trouble after 1,700 acres.” On the negative side, “My White 435 chisel plow works good, but leaves dint piled up in the middle and low on the outside, It leaves the ground so rough that if you work ground in the fall, it washes bad over winter.”
Larry Knickerbocker, Pittsford, N.Y.: Larry’s 1989 Deere 9400 combine is a“best buy”. “It went right through wheat that was loaded with quackgrass and badly lodged due to too much nitrogen. We're glad we didn’t invest in a grain cleaner because it delivers clean grain. The grain loss monitor is excellent.”
Own a John Deere? Tell FARM SHOW how it’s held up.
Your report could appear in a future issue.