Vicon: what farmers say
10 reports in FARM SHOW · 8 Best Buys2 Worst Buys
Vicon 423T rake follows
2 Best Buys1 Worst BuyLarry’s the satisfied owner of a 2014 New Holland 7230 discbine. “This is our third New Holland discbine, starting with a model 411 and then a 1411. We’ve had great luck with all of them, but it’s nice to see that as they get older they get better. Each new model seems to outperform the one before it. The 7230 mows and dries hay fast and is very reliable.
“Our 2015 Krone Swadro 42T 3-pt. mounted rotary rake is well constructed but hard to level, and it does a poor job when going through dips and hollows. It misses hay at the bottom of a dip, but unfortunately rakes in all the rocks on the edges. Our Vicon 423T rake follows the contours much better but is poorly constructed.”
“We traded our New Holland 1411 discbine for a 2013 New Holland 7230. The 1411 was a great machine with few problems, but it had covered a lot of acres. The 7230 just completed a full season with no problems except for a torn clip on the curtains.
“My Vicon 423T rotary hay rake does an excellent job of raking dry hay, but it won’t pick up green hay that has been run over. And if I adjust the rake to get it down to that hay, it picks up too many rocks. Another problem is the tine bars only have one bolt holding them on, and they cracked. The company made us buy an upgrade kit to solve the problem. The machine’s height adjustment keeps locking up, and the hitch pins break too easily. This discbine wasn’t built in the Vicon tradition.”
Larry likes his 2008 Woods 1800 15-ft. batwing mower. “It’s built super heavy, with a smooth deck so trash doesn’t build up on it as badly as on some other models. The blade speed is higher than most other brands and it mulches better, too. Also, I like the optional wheel package – it doubles the number of wheels and they pivot, which results in very little scalping.
“My 2005 Vicon 423T rotary rake does a super job of raking dry hay and makes a nice windrow, but when I try to rake green hay it has no lifting action. As a result, it won’t pick up any hay that has been run over. Also, I’ve had trouble with the tine arms coming loose and cracking. The company made an update to fix the problem, but they made us pay for it. It’s the worst piece of Vicon machinery we’ve owned.”
Vicon 713T rotary rake
1 Best Buy0 Worst Buys“My 2010 Vicon 713T rotary rake can handle either a 22-ft. windrow or two 11-ft. windrows. It does the work of three side delivery rakes, and it does it much better.
“My 2000 Deere 335 round baler has performed flawlessly while requiring only routine maintenance.”
Vicon CM2200 mower
1 Best Buy0 Worst Buys“I like my 2000 Vicon CM2200 mower. It’s well designed and well built.
“My Massey Ferguson 240-4 tractor does a nice job of handling this mower.”
Vicon CMZ800 disc mowers
1 Best Buy0 Worst Buys“I bought two Vicon CMZ800 disc mowers about 2 years apart. These mowers feature 3-blade discs for better cutting ability, and they have heavy cutterbars. The bar and gearbox oil are easy changes. Mows through the thickest hay with ease.
“The hydraulic coupler dust covers I bought from Deere for my 1995 Deere 6300 tractor cost $12.50 apiece. These rubber covers are designed to snap onto the hydraulic couplers on back of the tractor, but after one or two uses they tore and came apart. Deere refunded my money. I went to Tractor Supply Co. and bought their dust covers for $4.25 for two. These covers are much stronger and are still working good.”
Vicon RP 1210 round baler
0 Best Buys1 Worst Buy“It has more than 200,000 miles on it with no problems,” says Ben about his “best buy” 1998 Dodge 1-ton, 4-WD diesel pickup. “It rides smooth and gets 18 to 21 mpg.”
On the “worst buy” side, he lists his 1987 Vicon RP 1210 round baler. “This could be a good baler if I could get some dealer or factory help. I’m having trouble keeping the tailgate locked so that the pressure gauge will work. I called both the dealer and factory, but both of them basically said I should just buy a new baler. That’s all well and good if you have $23,000 just laying around. If anyone has any advice on this problem I’d like to hear from them.”
Vicon mower conditioner
1 Best Buy0 Worst Buys“I’m impressed with my 1993 Vicon mower conditioner. It does a good job of mowing any crop at 9 mph. I can mow all day long without having to look back to make sure it’s not plugging up. When I’m ready to mow I just go to the field - no need to make repairs first like on a sicklebar. The driveline design is ‘chatter-free’ even on corners, and it’s equipped with adjustable wings that let me narrow the 10 1/2 ft. cut to any width I want. The only problem is that there aren’t many dealers in our area. “Combined with my 8-wheel V rake and Vermeer Super J round baler equipped with a bale kicker, I have a great baling team.”
Vicon model
1 Best Buy0 Worst Buys“My worst buy is my Gehl 9-ft. disc mower. The problem is that it cuts slow. I have to operate my tractor two gears slower than I did with my previous mower, an 8-ft. Vicon model. Also, this mower has three cutting blades per disc while the Vicon needed only two.”
Vicon rotary mower
1 Best Buy0 Worst Buys“My 2004 Vicon rotary mower is my best buy. It cuts good at lower rpm’s than most rotary mowers and only requires a 42 hp tractor to power it. It has three cutter blades per disc compared to two blades per disc on most mowers. This lessens the cutting amount per blade, which lessens the power needed to turn the blades.
“This mower’s only problem is that it’s hard to maintain an even cutting height above ground. I solved this problem by making an outer cutterbar shoe from a tandem disc. I turned the cupped area up toward the cutterbar with a makeshift bracket on the disc to mount on the regular cutterbar bolts. The reason I used a disc was to provide a sled runner surface in every direction.”
Read every report in full
FARM SHOW has run reader Best & Worst Buys since the beginning.