Poulan chainsaw
What FARM SHOW readers say · 11 Best Buys5 Worst Buys · Chainsaws & Saws
Poulan chainsaw
11 Best Buys5 Worst Buys“My Deere Gator was expensive, but it’s very dependable. I just do oil changes and regular, limited maintenance. They’re quality machines.
“My 2022 Poulan chainsaw is the same size as my old one but has limited power. It had to be tweaked to get it running right.”
“Stihl chainsaws, both gas and electric, are very dependable and easy to use. I’ve had good customer service where I bought it.
“I have a Poulan chainsaw that’s about 7 years old. I can’t find a replacement blade to fit it. Either they’ve changed sizes, or the blades are made differently. There’s no dealer support.”
“I had a 1995 Ford Powerstroke F-250. I sold it to a neighbor with 556,000 miles on it. It now has over 600,000 and still runs fine. 7.3 Powerstrokes are indestructible.
“I have three Poulan chainsaws, and none start easily.”
“A Poulan chainsaw with an 18-in. bar bought in 2017 was my worst buy. When new at first it started and ran good. Then after about 20 hrs. it got difficult to start and sometimes died while cutting. Needless to say I junked it and bought an Echo 20-in. No more problems.”
“My 2011 Poulan 18-in. chainsaw has seen moderate to heavy use but is still going strong.
“Far and away my worst buy is my Maytag washing machine. It broke down after just two years of moderate use by our 2-person family.”
“I own two 2000 Poulan chainsaws, one equipped with a 16-in. blade and the other a 20-in. blade. Both saws still start by the third pull. However, last year I couldn’t keep the 16-in. model running so I had a repair shop look it over. They charged me $20, and soon after I brought the saw home the same problem happened again. The problem turned out to be that the vent in the gas cap was plugged up.”
Mark is satisfied with his 2007 Jonsered 2171 chainsaw equipped with a 32-in. bar. “This wood-eating machine just kept going and going until the engine finally lost compression. I put in a rebuilt piston, and now it’s running like new again.
“Homelite, Cub Cadet, and Poulan chainsaws are what I call disposable saws - you use them a few times and then throw them away. But if you have a lot of wood to cut, don’t waste your money on them because some day you’ll still have to buy a real saw.”
“My worst buy is my 2013 Poulan 16-in. electric chainsaw. I was only able to cut 1 1/2 cords of wood before 3 of the teeth on a plastic gear broke off. The company doesn’t offer a replacement gear, so the only solution is to buy a new motor. However, the motor costs almost as much as a new chainsaw. It was a nice saw when it worked, but now it just sits in my garage.”
He likes his 2003 and 2010 Poulan medium duty chainsaws equipped with 16-in. bars. “If you’re looking for an inexpensive saw, these are hard to beat.”
“My 1998 Cook Accutrac sawmill is by far the best sawmill I’ve ever owned (ph 800 473-4804; www.cookssaw.com). I used it to build my 5,000 sq. ft. house out of trees that people gave me, so I have all types of wood in the house.
“My Poulan chainsaw didn’t cut right from the start. I was able to use it for only about 3 hrs. before it quit working. I went back to Lowes where I bought it and they gave me another one. However, it didn’t run even as long as the first one. Lowes finally gave me credit on a new Husqvarna model, which I really like.”
“It has been a dependable machine so far,” says Parker about his 1999 Deere 250 skid loader. “This model doesn’t have the best reputation, but my dealer thoroughly serviced it before I bought it. I use it with Loegering steel tracks during the summer and tire chains during the winter, which allows it to perform all the loader work on my 200-acre farm and woodlot. I use a number of attachments with it, which makes my life easier every day.
“My worst buy is the pellet stove I bought from U.S. Stove Co. When it works this furnace does a good job of heating my large old house, but it seems to go out often for no apparent reason. Then I restart the fire and away it goes – but only for a while.” Harbor Freight cargo nets that I bought for my Chevy S-10 pickup and my 6 by 8 by 2 trailer are best buys. The nets with wire hooks work better than the ones with big, flat plastic hooks. As a volunteer I haul large loads of food for food pantries, bags of used clothes for shelters, and cab-high loads of flattened cardboard for recycling. The net stretches over the most irregular loads and keeps everything intact.
“A lot of my friends think Poulan chainsaws are junk, but I use only Poulan Wild Thing saws and really like them. I buy the saws used at auctions and garage sales and throw them away if they cause trouble. They all use the same chains and sprockets so I can interchange parts. The company’s toll-free phone number for parts is printed right on the saw and has been helpful. I always get good service. I currently own five of these saws.”
“It’s going on 290,000 miles with no major repairs,” says Walker, pleased with his 2000 Ford Ranger 4-WD pickup equipped with a 4.0-liter gas engine.
“My 2008 Poulan 16-in. chainsaw is dif¿ cult to start, even after it has been running for a while. Also, the chain oiler clogs up.”
“Our 40 by 60-ft. Sentinal clear span metal building is well constructed. The contractor who built it said there were only four bolt holes that didn’t line up in the entire building. It went through a big snowstorm without any snow getting inside the building.
“My Poulan 16-in. chainsaw is a worst buy. It’s equipped with a finger-tightening chain, and it doesn’t work. I can’t keep the chains tight.”
“I bought my Poulan 18-in. chainsaw about two years ago. After I used it to cut a few cords of wood, the idling needed to be adjusted a little. But after that, no problems. I’ve used this saw to cut about 15 cords of wood. It isn’t a heavy duty model and I don’t consider it a best buy, but it’s not a worst buy, either.”
Dale’s impressed with his 2005 Toyota Tundra front wheel drive pickup equipped with a V-8 engine. “It’ll pull a 16-ft. gooseneck stock trailer with ease, as well as a 6,000-lb. load of round bales. Many people told me this pickup was too small, but I couldn’t be happier with it.”
He isn’t as pleased with a pair of Poulan chainsaws. “They’re the hardest starting saws I’ve ever owned. They flood easily. Three loose bolts fell out of one of the saws the first time I used it.”
“My 2005 Poulan chainsaw is my worst buy. As soon as I brought it home I found it very hard to start, so I took it back. The dealer gave me another one that started okay for about three months until the 90-day warranty expired, and then it wouldn’t start either. I went back and talked to a different salesman, who said a lot of people have the same trouble.”
Own a Poulan? Tell FARM SHOW how it’s held up.
Your report could appear in a future issue.