Hudson: what farmers say
5 reports in FARM SHOW · 4 Best Buys1 Worst Buy
Hudson bandsaw mills
3 Best Buys0 Worst Buys“My Hudson bandsaw mills are excellent (www.hud-son.com; ph 800 765-7297). I bought an Oscar 18 model in 2006 and an Oscar 228 in 2009. Both work great. I added a 3 by 6-ft. frame to them to extend the log table.
“Woodmizer bandsaw blades are excellent.”
“I like my new Hudson bandsaw mill but the tracks that it’s mounted on are too flimsy. The tracks consist of two 6-ft. sections of welded-together 2 by 2 angle iron.
“I wanted to reinforce the tracks and make the sawmill easier to move around, so I bought another 6-ft. section of angle iron track and welded it onto one end. Then I used 3-in. sq. tubing to build a support frame and welded it onto the underside of the tracks. I also added tandem axle wheels to each side.
“The wheels, which came off a pair of small hand trucks, are supported by homemade axles. The wheels are spaced farther apart than necessary because I had earlier used them for another project. I mounted the hand truck’s handles on one end of the trailer so that I could move it around by hand, but the trailer proved to be too heavy. So I welded a coupler onto the other end so I can move it around with my skid loader.
“The portability really comes in handy. For example, if I get too much sawdust where I’m cutting up trees I can quickly move to another location. I use 4 jacks to keep the sawmill level on uneven ground. I spent less than $500, whereas a new trailer for the sawmill would have cost at least $2,000.”
“I like my 2007 Hudson bandsaw mill, which is equipped with a 30-in. throat and 18-ft. track. I retired in March 2007 and this mill has provided me with an enjoyable pasttime. I used it to saw lumber to build a shed that now houses the sawmill. I also used it to build an attached building that holds a planer table saw and a workbench, where I glue up and clamp doors, cabinets, and other projects.”
Hudson water valves flow
1 Best Buy0 Worst Buys“I like my 2016 New Holland Workmaster 70 tractor and 2017 New Holland T4 100 cab tractor equipped with a front-end loader. The Workmaster has a lot of pep, is economical, and is a nice size for raking hay and making small square bales. The T4 is fuel efficient and recently averaged an impressive 1.3 gal. per hour doing chores. It uses just 2 gal. per hour whether pulling a Deere 15-ft. no-till drill or my Deere 630 disc mower conditioner. The cab is fairly quiet and has a nice air seat, and the air conditioner and heater work good. However, side access to the filters is awful, and the front lights on the cab aren’t very intense and can’t be aimed downward.
“My worst buy is a 2015 Kioti PX9020 tractor equipped with a cab and front-end loader. It was built by people who have never farmed in the U.S. It’s extremely noisy with a lot of engine, gear, and hydraulic noise. It has low torque and power, and uses about 4 gal. per hour no matter how I use it. The fuel gauge screams empty after just 6 hrs., the forward/reverse gear shifter is balky, and the hydraulics don’t lift at their rated capacity.
“After the tractor spent six weeks at the dealer during the height of hay season, I decided it was time to trade. My offer to Kioti to have them come out to my farm and evaluate the performance of their tractor on an American dairy farm is still open.
“We’ve tried several different float valves on our stock tanks but are still looking for a good valve that can handle solar-pumped pond water. Hudson water valves flow good but plug about every month, sticking in the flow position and overflowing the tanks. Brown Weight valves flow good, but plug up in less than 24 hrs. ROJO (Jobe) valves have never failed us, but their low water flow simply can’t keep up with a herd of cattle. The most reliable valves we’ve found are made by Dare-O-Matic (www.dareproducts.com; ph 800 922-3273). They don’t flow as fast as Hudson valves, but they never plug or fail.”
Hudson backpack sprayer
0 Best Buys1 Worst Buy“This has to be one of the best engineered tractors on the market,” says Dale about his Steiner 4-WD turf tractor equipped with a front-mount mower deck. “It’s available with more than 30 attachments, which can be changed without tools in only a few minutes. The mower is in front where it’s easy to see. And with 4-WD this tractor has fantastic traction. If I were 30 years younger, I’d probably become a dealer.”
“My Hudson backpack 4-gal. sprayer is my worst buy. It won’t build up pressure and needs continual pumping. Rubber pump parts wore out fast.”
Read every report in full
FARM SHOW has run reader Best & Worst Buys since the beginning.