"Owner's Report" On Do-It-Yourself Pellet Machines
“I bought the smaller Pellet Pro machine with a 7 hp electric motor. The machine is fine for what it is - a low-cost unit. Most pellet-making machines are big commercial units that cost $500,000 or more. I paid just $2,800 and so far I’ve made pellets from alfalfa with corn distilling byproducts added and also from chopped soybean residue and distillers grain. It all depends on the ratio of water or oil to dried materials. If you get it just right, it’ll make decent pellets.
“I’ve had trouble making pellets hard enough to feed through the two augers on my corn stove. They break up before they get to the firebox. However, I made some pellets for a friend who has a newer stove that gravity feeds from the top and he says they work great.
“The dies on the Pellet Pro are poorly designed so I made my own, which works a little better. I feed sheep and have been making pretty decent alfalfa pellets for them with 10 to 15 percent distiller’s grain added for protein – and to make the pellets a little harder. For burning, I use soybean stalks mixed with distiller’s grain.
“Anything you pelletize has to fit through a 1/4-in. screen.
“I’d recommend going to a bigger machine with a 15 hp diesel engine. It’s rated at 650 lbs. per hour, has bigger rollers, and is not so temperamental to moisture content.”

Reader comments