Troy-Bilt tiller
What FARM SHOW readers say · 5 Best Buys3 Worst Buys · Mowers, Lawn & Snow
Troy-Bilt tiller
5 Best Buys3 Worst Buys“My best buy is my 1942 Farmall H. I use it for plowing and disking my small farm.
“I also have a 1983 Troy-Bilt tiller that still runs well, and my 2010 Ford F-150 truck has 300,000 miles.”
“I couldn’t get my Lincoln 180 welder to do a good job, so at my uncle’s suggestion I bought a new Millermatic 211 MIG welder. I liked it so much that I ended up trading the Lincoln for another used Millermatic 211.”
On the “worst buy” side, he lists his 2017 Troy-Bilt rear tine tiller. “After we bought a new place we needed a rototiller for our garden, so I paid $700 for this reverse tine tiller. However, it didn’t work well in our sandy soil as I had to push the tiller forward just to keep it from getting stuck. I ended up selling it a year later for $150.”
“My 1998 Deere 345 riding mower equipped with a 50-in. deck is dependable and trouble-free. It has about 900 hrs. on it.
“My best buy Troy-Bilt garden tiller, equipped with an 8 hp Kohler electric start motor, is on its third set of blades. The tines on this machine are nearly worn out but it still does a good job.”
Jerry’s “best buy” is the Icynene spray-on insulation he uses in his shop (Koopman Icynene, Pella, Iowa ph 866 321-0131). “My shop measures 60 by 30 ft. and has 10-ft. sidewalls. I use a small wood stove to heat it to over 70 degrees, even when it’s 10 degrees below zero outside. I can stoke the fire at 5 p.m. and by 9 a.m. the next morning it’ll still be 45 degrees inside the shop. I told my wife that if we ever build a new house, I’ll use this insulation.”
On the “worst buy” side, “My Troy-Bilt rear-tine tiller was advertised as easy to handle. Well, I weigh 215 lbs. and it just about throws my arm out of their sockets whenever this machine hits a hard spot. There’s no drag stake so it lunges forward. When I call the company I always get a busy signal, which makes me feel I’m not the only one to have problems with this product. I tried selling this machine, but no one wants it.”
“My 8 hp Troy Bilt tiller is my worst buy. All the knobs came off the levers, making it so hard to shift that I broke off a bracket and had to weld it back on. I have to use a tarp strap to keep the rig in gear. The dealer charged $90 to fix a flat tire and said I was lucky, because sometimes to fix a flat tire they have to cut the entire wheel off the axle. The tube holding the air cleaner is made of plastic and broke. The muffler is located on top of the machine and isn’t protected, which makes it easy for the operator to accidentally burn himself.
“One of my best buys is an old pto-driven manure spreader that unloads out the front corner. Anyone know who made it?”
“A 1987 Kubota B-8200 4-WD tractor rates as Gene’s “best buy”. “It’s an excellent tractor that now has more than 2,700 hours on it. I’ve only replaced a fan belt and two sets of front tires. I wouldn’t trade it for a brand new one.
“MyTroy-Bilt rear-tined tiller is my worst buy. It works good in sand or fine soil, but if there are any rocks in the soil it’s dangerous to operate. A Mantis tiller will outperform it 10 to 1 and is also safer to use.”
“A 1977 Troy-Bilt rear tine tiller equipped with furrower, hiller, and marker is my best buy. It performed far beyond the company’s claims. I never have to spend more than 20 minutes per year hand hoeing my 1 1/2-acre vegetable garden. I plant everything on ridged rows so I’m able to use the tiller to do all my weeding and cultivating, working within 1/2 in. of the plants.
“My 1993 Bolens 14 hp lawn tractor (made by Troy-Bilt) equipped with hydrostatic transmission, cruise control, and electric lift is neither a best nor a worst buy. The mower drive belt wouldn’t stay on the pulleys because the belt guides were missing. I called the company and they shipped the guides, as well as a new belt, by UPS. Then the electric lift stopped working. The company claimed the lift unit couldn’t be repaired and would have to be replaced, which was done at a cost of about $400. However, the second lift unit failed after only about one year. I was determined to repair it and find a way to get parts for it. The Troy-Bilt service rep provided me with a contact at Dana Corp., the lift unit manufacturer, which directed me to its local service dealer. I finally got the part that I needed. The screw shaft in the lift unit has a weakness which I cured by installing a collar over the end of the shaft to keep the screw ball from splitting out. Overall this tractor is quiet and is a pleasure to operate, and it has a lot of power.”
“My best buy is my 1986 Troy-Bilt tiller. No problems or repairs in 12 years.
“My two Snapper mowers - one riding and one a self-propelled walk behind - are both best buys. No problems with either one.
“I’m well satisfied with my two Dodge Dakota pickups. One is a 1987 model and the other a 1989.”
Own a Troy-Bilt? Tell FARM SHOW how it’s held up.
Your report could appear in a future issue.