Polaris 350 cc liquid-cooled 4-wd
What FARM SHOW readers say · 5 Best Buys0 Worst Buys · ATVs & UTVs
Polaris 350 cc liquid-cooled 4-wd
5 Best Buys0 Worst BuysCharles N. Nichols, Jr, Molina, Colo.: “Its easy to service and maintain and is American-made,” says Charles about his “best buy” Polaris 350 4-WD ATV equipped with a liquid-cooled engine. “It's easy to service and maintain and has a lot of power, I've used it to haul 300 Ibs. of salt to livestock, up grades of more than 15%.” “My 1995 International Eagle 9200 truck equipped with a 430 Detroit really works great. It has a lot of power for the mountains and on-demand 4-WD, It rides and handles great even on slick roads and is driver friendly.”
Michael L. Smith, Fulton, Mo.: One of Michael's “best buys” is his 1993 Polaris 350 4-WD ATV, “I know Polaris now makes bigger ATV's than mine but this one has never failed me on low-end power, agilily, mid-range torque, or top-end performance. “Also on the best buy side, I purchased a Panel Bender made by Vic Stratman (HCR 71, Box 54, Argyle, Mo. 65001), It turned what was once a flimsy wire livestock panel into a rigid gate-like structure that’s very sturdy. I read about this product in FARM SHOW.”
Allen W. Cohrs, Donna, Texas: Allen’s impressed with his 1994 Deere 7400 MFWD tractor. “It has all-new 3-pt. hitch “Every day we wonder what will happen next.” controls that work great for digging ditches where constant readjustment is necessary. The dual lift cylinders can lift big implements with ease. It also has great power and traction in muddy conditions. “My worst buy is my 1993 Berthroid blower sprayer equipped with a hydraulically-adjusted canon head, It kept breaking down constantly for 1/2 years so T traded it toward the purchase of another implement, If this is an example of foreign-made equipment, I feel sorry for foreign farmers. I used the sprayer to treat the edges of my cotton fields, but it broke down at least every 4 or 5 hours. Almost every part of the sprayer had to be welded or braced. The fiberglass canon on top had to be replaced because it had cracks in it. All of the metal below the pump had to be replaced because it was too thin. The metric pto shaft broke three times. We finally replaced it with a standard pto shaft that cost $350, This machine cost $7,800, but it wasn’t worth $500." Albert Escamilla, Il, Normangee, Texas: Albert likes his 1993 Polaris 350 6WD, 6-wheel ATV equipped with a dump bed. “It’s an excellent product, own only 12 acres, but I use it every day. It has more power and traction than I normally need. have over 500 trouble-free miles on it.”
Luke R. Thelen, Fowler, Mich.: Luke's happy with his Deere 2800 variable width plow. “Lets me adjust plowing width onthe-go hydraulically from the cab. “My Polaris 350 cc liquid-cooled 4-WD ATV is handy and a good buy.” On the “worst buy” side, Luke lists his Mohawk rotary brush cutter. “It continually sheared bolts on uneven ground. Finally I installed a slip clutch pto.”
John Christen, Albany, Minn.: “My 1991 Polaris 350 liquid-cooled 4-wheeler is a best buy. use it for chasing cattle, building fence, checking crops, pulling trailers, traveling between farms, etc. This is my second Polaris 4-wheeler and I'll never own another brand. “My 1988 Case-IH 6500 conser-till plow is also a best buy. It’s never plugged up in corn stalks. The hydraulic-operated disk can be easily adjusted for working at different depths. “My 1988 Sanborn portable 2-cylinder, 3 hp electric air compressor is a worst buy. After only a little use the air hose became rotten, and the electric motor always started hard, It recently quit altogether.”
Own a Polaris? Tell FARM SHOW how it’s held up.
Your report could appear in a future issue.