GMC 4-WD pickup
What FARM SHOW readers say · 3 Best Buys1 Worst Buy · Trucks & Cars
GMC 4-WD pickup
3 Best Buys1 Worst BuyBruce A. Lawson, Falconer, N.Y.: Bruce is pleased with his 1990 Chevrolet 3/4-ton 4-WD pickup equipped with a4-speed automatic transmission with overdrive, “It handles like a sports car and rides as good as a Lincoln Towncar. I get 20 mpg on the “It handles like a sports car and rides as good as a Lincoln Towncar.” highway and 16 to 17 mpg in heavy traffic. Sometimes I use it to pull a tandem trailer, loaded with antique oil field engines, to antique engine shows up to 300 miles away. The 350 cu. in. engine handles the steep and long hills in our area without overheating. This model should last as long as my 1975 GMC 4-WD pickup which I drove for 15 years and went 257,000 miles with no major repairs. I never touched the engine except to replace fucl pumps. They lasted only about 50,000 miles.”
William Twidwell, Frankfort, Kan.: William nominates his Gehl 125 grindermixerasa “best buy”. “lowneda Gehl MX100 grinder-mixer for 13 years, and this model works just as good. The digital scale really doesn’t save any time so it’s probably no improvement over the cheaper analog scale, The optional electric unloading auger works a bit slow, but pushing a button is certainly easier than cranking a lever.” John Feltes, Garden Prairie, Il.; John likes his Dickey John model DJCCS100 spray conwoller, “This is the most precise spray controller on the market. It's accurate to within one gallon plus or minus on a 500gal. batch. Less than 1% error total. “My 1983 GMC 4-WD l-ton pickup equipped with a 6.2-liter diesel engine is a worst buy. I bought it used in 1983 with 18,000 miles. The engine lasted 46,000 miles before the company replaced it. The second engine lasted 51,000 miles before it blew out. I installed a new engine which now has 45,000 miles. I've gone through two turbo 400 transmissions and three sets of brakes. It spends only 25% of the time doing heavy work. The rest of the time is spent on the highway. How can GM produce such poor quality products and stay in business? I've driven other pickups equipped with Cummins diesels. They make GM's product seem like a joke. When will someone listen to the real needs of farmers and start to build these high-priced ‘work trucks’ to last?”
Mitchell Parker, Laurel Hill, Florida: He had trouble with "a 6-ft. Hi-Co rotary mower made in Laurel, Miss. The first time the pto was engaged the shear pin broke. I replaced the pin witha no, 5 bolt and it sheared within an hour. I replaced it again and it sheared within a ¥ hr. I replaced it again and the gears stripped in the gear box. Also, a welded-on brace that attaches to the 3-pt. hitch came loose. After only 3 hrs. mowing | was left with $700 worth of junk." Gerald Mullaney, Orient, S. Dak.: "In 1977 I bought a GMC 4-WD ¥-ton pickup with full-time 4-WD. It now has over 100,000 miles on it with just normal’ service.” “T also bought a Deere 4450 tractor in 1984 with a 15-speed power shift tranmission and it's been great. Not even a small oil leak.” On the “worst buy” side, Gerald has had problems with a 1978 50 by 80 Butler Farmstead building. “When it's raining it's hard to tell sometimes if you're inside or outside. It was supposed to be for grain storage “When it’s raining, it’s hard to tell sometimes if you’re inside or outside.” but grain doesn't keep very well when it’s rained on.”
Mark Lindberg, Fertile, Minn.: “Every time we use it we hold our breath,” says Mark about his “worst buy”, an 1800 4-WD Massey Ferguson. “It's been through an engine, transmission and front and rear axles all in one year, plus an electrical system, alternator and hydraulic system.” On the plus side, Mark's happy with his 1977 GMC 4-WD ‘%%-ton pickup with a 350 engine. ‘‘In 150,000 miles I've only had to putin two clutches and one set of plugs. I use it every day and use it hard for spraying, and for pulling trailers and heavy loads.”
Own a GMC? Tell FARM SHOW how it’s held up.
Your report could appear in a future issue.