Jonsered: what farmers say
19 reports in FARM SHOW · 18 Best Buys1 Worst Buy
Jonsered chainsaws
5 Best Buys0 Worst Buys“Growing up on a small dairy farm, we had a Deere M as our only tractor…”
“My best buy is a Jonsered chainsaw. It works as well now as when I got it 40 years ago. It starts well and cuts fast. It has cut many trees. About the only thing I’ve had to replace has been a new chain every few years.
“An electric Lynxx chainsaw has been a disappointment. It cuts fairly well but the battery runs down pretty fast. I plan to get another electric chainsaw, but it will be a different brand.”
“All the Jonsered chainsaws I’ve owned over the years have been best buys. The 2171 Turbo model I bought in 2003 has been bulletproof. In 2013 I bought a 2152 model that starts, runs and cuts great, but some features on it aren’t built as sturdy as the 2171. For example, the on-off switch broke within 6 months. But the dealer replaced it free of charge.”
Brian’s impressed with his two Jonsered chainsaws - a 1997 model 2054 and a 2000 model 2149. “The 2149 model has never needed repairs, and the 2054 model has only needed 2 ignition switches replaced. Both saws have cut a lot of wood. They have especially good anti-vibration handles.”
“Our 1994 Deere 9400 combine handles well, has good visibility, a quiet cab, and easy-to-use controls. It’s also easy to adjust for different crop conditions. So far it’s been trouble-free. “My Jonsered chainsaw worked well for a few months, but now when it starts up cold it works only for a few minutes. The dealer can’t solve the problem.”
Jonsered 2171 chainsaw equipped
1 Best Buy1 Worst BuyMark is satisfied with his 2007 Jonsered 2171 chainsaw equipped with a 32-in. bar. “This wood-eating machine just kept going and going until the engine finally lost compression. I put in a rebuilt piston, and now it’s running like new again.
“Homelite, Cub Cadet, and Poulan chainsaws are what I call disposable saws - you use them a few times and then throw them away. But if you have a lot of wood to cut, don’t waste your money on them because some day you’ll still have to buy a real saw.”
“We haven’t had any problems with our two 2009 Jonsered 2171 chainsaws. We use them to cut tons of wood every week.”
Jonsered 2255 chainsaw
2 Best Buys0 Worst Buys“My Jonsered 2255 chainsaw has been a good investment. It starts easily, is economical to use and cuts very well. The chain tightener takes a little getting used to but works okay.”
“I’ve already used my 2014 Jonsered 2255 chainsaw to cut about 2 cords of firewood. The primer bulb and compression release makes it easy to start. It also cuts good. Some of the wood that I cut is full of dirt and rat nests, which is hard on saws. My old Jonsered lasted for about 15 years, and I hope this one does, too.”
Jonsered 535 chainsaw
2 Best Buys0 Worst Buys“My 1992 Jonsered 535 chainsaw is still going strong. I have cut firewood for myself and others for years with this saw but had it in the shop only once. It’s still going strong. I feel having the fuel mixture rich is a plus.”
“It easily outperforms any chainsaw I’ve used before,” says Ray, pleased with his 1995 Jonsered 535 chainsaw. “I use it every winter to cut firewood for four households. It has a 24-in. Oregon bar and a carbide chain that I bought from Cutter’s Choice (ph toll-free 888 288-8371 – parts for most chainsaws). This chain stays sharp much longer and lasts longer than a standard chain.”
Jonsered 2150 chainsaw
1 Best Buy0 Worst Buys“I have a list of best buy products that I call my ‘wish I had bought two of them. It includes my 2001 Honda Foreman 4-wheeler, 2003 Deere 4310 tractor equipped with a hydrostatic transmission, 2005 Dodge Ram diesel pickup, 2006 Central Boiler outdoor furnace, and 2006 Jonsered 2150 chainsaw. All of these products get used hard but have required only routine maintenance.”
Jonsered 2152C chainsaw
1 Best Buy0 Worst Buys“My 2012 Jonsered 2152C chainsaw and CC2128 brushcutter are both best buys. These tools start right up and are lightweight yet powerful. I bought a Jonsered chainsaw in 1984 and when it finally quit working on me last year, I didn’t hesitate to buy another one.”
Jonsered 2166 chainsaw equipped
1 Best Buy0 Worst Buys“It’s one of the best saws I’ve ever had,” says Andrew about his Jonsered 2166 chainsaw equipped with a 20-in. bar. “This saw starts right up and always runs great. I bought it to replace my 2012 Husqvarna 372 XP saw equipped with a 20-in. bar. I couldn’t start the Husqvarna without pulling the rope 10 to 15 times, even in summer. When I finally did get it running it ran great, but if I made a few cuts and then shut it off and tried to start it again, I couldn’t. The dealer installed a new spark plug but it didn’t help. We’ve had a lot of trouble with Huskies over the years.”
Jonsered 225OS chainsaw
1 Best Buy0 Worst Buys“My 2014 Jonsered 225OS chainsaw starts good and runs smooth even at high rpm’s, with almost no vibration. It’s a great saw.”
Jonsered 920
1 Best Buy0 Worst BuysDoug Husted, Gladwin, Mich.: He names his 1983 Honda Big Red 3wheeler, 1986 Jonsered 920 chain saw and Ruger 44 magnum pistol as "best buys". "The 3-wheeler is a good cow chaser and errand runner while the chainsaw is fast and trouble-free. The pistol is accurate and packs lots of power."
Jonsered CS 2152C chainsaw
1 Best Buy0 Worst Buys“My 2012 Cub Cadet Volunteer 4-WD utility vehicle is well-built with more than 400 trouble-free hours on it. The steering could be improved so it would be easier to make slow turns. We use it to pull a maple syrup trailer in the spring and to do spraying work.
“My 2013 Jonsered CS 2152C chainsaw starts easy, cuts fast, and is lightweight.”
Jonsered Iron Horse
1 Best Buy0 Worst Buys“I purchased a Jonsered Iron Horse about 20 years ago. It’s primarily used when working in my woods gathering firewood. It’s a low-impact tracked unit that’s very maneuverable and can go up and down slopes that are steeper than I can walk comfortably. I’ve also found it useful for hauling tools and fertilizer when working in my tract of black walnuts. I liked it so much I bought a second unit, so I have one configured with a cargo bed, the other with the ‘log bunk’ for hauling logs out of my wood lot.”
Keith isn’t pleased with his 2018 Deere 5075 tractor he bought used in 2020 with 180 hours. “I should’ve researched the model better before I bought it. After purchasing, I read the user manual and discovered that the tractor hydraulics aren’t to be used for powering orbital hydraulic motors. My main intended use for it was driving a woodchipper with hydraulic feed rollers. I had to outfit my new chipper with an auxiliary hydraulic pump. Then, I later discovered that the pto isn’t able to drive the chipper with larger material. That’s what I bought it for.”
Jonsered linetrimmer/brush cutter
1 Best Buy0 Worst Buys“I like my Jonsered linetrimmer/brush cutter. I just finished my 4th season with no problems. It starts on the first or second pull, and the harness takes the load off my arms. The two hand grab-bar with built-in throttle control is perfectly balanced. Sometimes I run it all day, stopping only for fuel or to replace line.”
Read every report in full
FARM SHOW has run reader Best & Worst Buys since the beginning.