Real farmers rate what they bought, from FARM SHOW MagazineSubscribe  ·  Free issue  ·  Send us your Best or Worst Buy
Subscribe to FARM SHOW
Home › Brands › Erskine

Erskine: what farmers say

4 reports in FARM SHOW · 4 Best Buys0 Worst Buys

Erskine front-mount snowblower

2 Best Buys0 Worst Buys
Best Buy
Steven M. Liss, Harrison, Idaho · Vol. 36, No. 6 (2012), p. 15

“I bought my Deere 5410 diesel tractor used with less than 1,000 hours on it. It always starts right up with no fuss. I use it to blow snow with an Erskine front-mount snowblower (ph 800 437-6912; www.erskineattachments.com) which has been trouble-free, and to cut 6 acres of grass with a Deere 10-ft. bush hog. I love the quiet cab with air conditioning, heater and stereo.”

Best Buy
Glen E. Brothers, Dix, Neb. · Vol. 26, No. 1 (2002), p. 14

“My best buy is my 7-ft. wide Erskine snowblower that mounts on the front-end loader on my Deere 3010 tractor (Erskine Mfg. Co., Inc., Erskine, Minn. 56535 ph 218 687-4045). The snowblower was designed for front-mount use. I bought it new in 1985 without any mounting brackets or driveline. I made my own brackets and converted an old driveline that I already had. The driveline hooks up to the tractor’s existing front pto. A 3-ft. long slip joint allows the snowblower to be raised up or down without damaging the driveline.

The snowblower attaches to the loader with four bolts. A safety chain keeps us from raising the blower so high it pulls the driveline apart.

“I’ve used it to blow hundreds of tons of snow with no problems,” says Brothers. “It throws snow out more than 100 ft., and I can raise it up high enough to cut the top off a 6-ft. drift. It also does a great job chopping up chunks of ice. A shear bolt on the driveline and auger drive protects against damage in case some foreign object is picked up.”

Erskine 725 front-mounted snowblower

1 Best Buy0 Worst Buys
Best Buy
Alan Klar, Plymouth, Minn. · Vol. 41, No. 2 (2017), p. 14

Alan’s the satisfied owner of a 2015 Deere 4066 R tractor, which he uses with an Erskine 725 front-mounted snowblower and a Land Pride 3-pt. mounted, 8-ft. blade. “This tractor has good comfort and visibility and a short turning radius, which works great for snow removal.

“We’ve used Echo power equipment including chainsaws, backpack blowers, and string trimmers for many years. All have required only routine maintenance.”

Erskine heavy duty brush

1 Best Buy0 Worst Buys
Best Buy
Jeff Prose, Lakeville, Minn. · Vol. 39, No. 1 (2015), p. 14

He says the Erskine heavy duty 6-ft. brush mower that mounts on front of his father-in-law’s skid steer is the best rough-cut rig he’s ever seen.

“I’ve used different cutters on other skid steers and 2 different 3-pt. mounted models behind tractors, and this one beats them all,” Prose says. “The front of this mower has 2 V-shaped cuts in the frame that keep material feeding into the blades rather than sliding off to the side. The center in front is flat and we can easily knock down and cut off 4 to 6-in. trees along fence lines and field edges. We use the hydraulic mower on a 74 hp JCB skid steer that has plenty of power to handle trees, tall brush and thick grass. I’ve cut trails in the woods and the stump jumper feature, which is like a cone over the blade mounts, keeps the mower from plugging in heavy trash conditions.”

Prose says, “The mower also works great to trim 4 to 6-in. branches up to 10 ft. in the air. To do that we tilt the deck at an angle to make sure we’re not throwing debris into the front of the skid steer or hitting the window. The mower has 2 quick-tach hoses wrapped with tough fabric to protect them from flying debris. Hydraulic power runs through a heavy duty gearbox that has a flow-control override rather than shear pins.

“The 5/8-in. thick blades have 2 cutting edges so we can turn them around if they ever get dull. The tip speed on the blades is more than 19,000 ft./min. when the engine is running full throttle. The deck is made of 1/4-in. steel and reinforced around the edges, across the top and down the sides. A 1-in. wide piece of flat steel on the bottom of the frame is angled up at the front and back to provide a smooth surface for the mower to ride on.

“The mower weighs a little over 1,600 lbs, so it’s definitely built to handle the toughest cutting jobs out there. Having it mount on the front of a skid steers makes it a lot easier to operate than 3-pt. mowers that mount on back of tractors. I’d recommend this mower to anyone.”

Read every report in full

FARM SHOW has run reader Best & Worst Buys since the beginning.

Subscribe to FARM SHOW